sidechannel_543

Side Channel Blowers

A range of over 60 models providing up to 2,200 cubic metres per hour or more if required

sidechannel_543


BVC is the original “British Vacuum Cleaners”. The BVC range includes Industrial Vacuum Cleaners, Exhausters and Blowers, and Central Vacuum Cleaning Systems.

The Functioning of side-channel blowers and vacuum pumps (aspirators) is based on the principle of the outflow of air, by means of spiral movements created by the centrifugal force of the special impeller in a peripheral toroidal channel.

What this means in practice is that their simple design makes them low cost and their non-contact configuration means they have no wearing parts, so they are extremely reliable.The design is such that the main bearings are outside the compression chamber and are therefore shielded from the heat generated during compression. Bearings are generally sealed for life. Depending on environment and workload typical life-span is 10–20 years.

Side channel vacuum pumps are extremely flexible. They can be installed either horizontally or vertically. They are extremely robust. Die cast aluminium casings make BVC side channel vacuum pumps lightweight in comparison to some alternatives.

BVC side channel units are Low Noise; they have internal silencers built into design, efficient; only high quality electrical motors are used and maintenance free as they utilise ‘sealed-for-life’ bearings.

Key Features

  • Continuous Safe 24/7 Operation
  • Wear free shaft sealing
  • Impeller rotates without contact so no wear
  • Fitted with thermal cut-out as standard
  • Compact & Lightweight
  • Can be mounted in any position
  • Low noise level – integrated silencer
  • 100% ‘oil free’ non pulsating air
  • Fan cooled motor
  • Long-term greased bearings
  • Direct drive – no belts or couplings
  • Models with greater volume/pressure also available
  • ‘In-house’ technical support
  • A full range of accessories is available including silencers, valves and gauges

Pressure from 250mmH20 (.67 inches of Mercury) to 4250mmH20 (11.8 inches of Mercury)

BVC side-channel blowers / Vacuum Pumps (aspirators) are built with die-cast aluminium alloy, wherever it is possible. This ensures high performance, reduces production costs, increases output and fosters quality uniformity.

The standard side channel blowers / aspirators are designed to handle clean air up to a maximum of 40°C.

All BVC blowers and vacuum pumps are fitted with a thermal cut out (TCO) device. Motors up to 5.5kW use bi-metal thermal sensors (Klixon), whereas over 7.5kW uses a thermistor PTC type. We recommend that these are wired up on installation.

All BVC units are manufactured in die-cast aluminium alloy, which ensures a consistent high quality and productivity. Production costs are minimised due to modular construction.

Standard motors are two pole, totally enclosed air cooled, continuous duty rated, IP 55

protected, insulation class F, and meet the CEI EN 60034-1:2011-03 (CEI 2-3) specification.

A full range of accessories is available including silencers, valves and gauges
Side Channel units have die-cast aluminium casings – they are mostly direct drive with the motor forming part of the main unit, this makes them lighter, quieter and very compact. The lower cost and the ease of incorporating them in other equipment or plant makes them ideal as an OEM solution to the supply of pressure or vacuum. The units are low maintenance and are often considered a ‘fit and forget’ solution.

We stock a wide range of Side Channel units particularly in the smaller sizes.

unijet-40-352
Unijet

Continuous safe 24/7 operation

Impeller rotates without contact, so no wear

Range from 0.2kW to 20kW as standard

mediojet_352
Mediojet

Continuous,safe 24/7 operation

Compact & lightweight

Impeller rotates without contact, so no wear

Range from 2.2kW to 6.3kW

2V twin stage models for higher vacuum

fluxjet-352
Fluxjet

Compact & lightweight

Smaller unit for continuous 24/7 operation

2V twin stage impeller models for high vacuum

technojet_352
Tecnojet

Small, lightweight, compact range of ‘fit and forget’ units for specialist applications

Continuous 24/7 operation use

Size range from 0.75kW to 1.75kW

Enquiries

Contact us today to find out how our solutions can help you.